Common Connectors; Led Mezzanine Connector (J1) - Motorola MVME2700 Series Installation And Use Manual

Connector Pin Assignments
4

Common Connectors

LED Mezzanine Connector (J1)

4-2
Connectors with pin assignments specific to MVME761-
compatible versions of the base board
VMEbus Connector P2 on page 4-25
Serial Ports 1 and 2 on page 4-27
Serial Ports 3 and 4 on page 4-27
Parallel Connector on page 4-29
Ethernet 10BaseT/100BaseTX Connector on page 4-30
The following tables furnish pin assignments only. For detailed
descriptions of the various interconnect signals, consult the support
information documentation package for the MVME2700 single board
computer or the support information sections of the transition module
documentation as necessary.
The following tables describe connectors used with the same pin
assignments by MVME712M- as well as MVME761-compatible versions
of the base board.
A 14-pin connector (J1 on the base board) supplies the interface between
the base board and the LED mezzanine module. On the base board, this
connector is a 2x7 header. On the LED mezzanine, it is a 2x7 surface-
mount socket strip.
Removing the LED mezzanine makes the mezzanine connector available
for service as a remote status and control connector. In this application, J1
can be connected to a user-supplied external cable to carry the Reset and
Connector
Computer Group Literature Center Web Site