Serial Interface Modules; Table 3-6. Sim Type Identification - Motorola MVME2700 Series Installation And Use Manual

Functional Description
3

Serial Interface Modules

3-26
Jumper-selectable active SCSI terminating resistors
Fused SCSI terminator power developed from the +5V DC present
at connector P2
A 64-pin VME connector to the MVME761
The synchronous serial ports on the MVME761 are configurable via serial
interface modules (SIMs), used in conjunction with the appropriate jumper
settings on the transition module and base board. The SIMs are small plug-
in printed circuit boards which contain all the circuitry needed to convert
a TTL-level port to the standard voltage levels needed by various industry-
standard serial interfaces, such as EIA-232, EIA-530, etc. SIMs are
available for the following configurations:

Table 3-6. SIM Type Identification

Model Number
SIM232DCE
SIM232DTE
SIM530DCE
SIM530DTE
SIMV35DCE
SIMV35DTE
SIMX21DCE
SIMX21DTE
For additional information about the serial interface modules, refer to the
MVME761 Transition Module Installation and Use manual, listed in
Appendix D, Related Documentation.
Module Type
EIA-232 DCE
EIA-232 DTE
EIA-530 DCE
EIA-530 DTE
V.35 DCE
V.35 DTE
X.21 DCE
X.21 DTE
Computer Group Literature Center Web Site