Motorola MVME2700 Series Installation And Use Manual page 172

CNFG and ENV Commands
6
6-8
Auto Boot Abort Delay = 7?
The time in seconds that the Autoboot sequence delays before starting the
boot. The purpose for the delay is to allow you the option of stopping the
boot by use of the <Break> key. The time value is from 0-255 seconds.
(Default = 7 seconds)
Auto Boot Default String [NULL for an empty string] = ?
You may specify a string (filename) which is passed on to the code being
booted. The maximum length of this string is 16 characters. (Default = null
string)
ROM Boot Enable [Y/N] = N?
Y
N
ROM Boot at power-up only [Y/N] = Y?
Y
N
ROM Boot Enable search of VMEbus [Y/N] = N?
Y
N
ROM Boot Abort Delay = 5?
The time in seconds that the ROMboot sequence delays before starting the
boot. The purpose for the delay is to allow you the option of stopping the
boot by use of the <Break> key. The time value is from 0-255 seconds.
(Default = 5 seconds)
ROM Boot Direct Starting Address = FFF00000?
The first location tested when PPCBug searches for a ROMboot module.
(Default = $FFF00000)
The ROMboot function is enabled.
The ROMboot function is disabled. (Default)
ROMboot is attempted at power-up only. (Default)
ROMboot is attempted at any reset.
VMEbus address space, in addition to the usual areas
of memory, will be searched for a ROMboot module.
VMEbus address space will not be accessed by
ROMboot. (Default)
Computer Group Literature Center Web Site