Table of Contents
Advertisement
INSTALLATION
Avoid vibrations.
Avoid condensation.
MAINTENANCE
When needed, wipe
the laser screen with a
soft, clean and damp
microfibre cloth.
SAFETY
The door control unit
and the door cover
profile must be correctly
earthed.
•
The device cannot be used for purposes other than its intended use. All other uses cannot be
guaranteed by the manufacturer of the sensor.
•
The manufacturer of the door system is responsible for carrying out a risk assessment and installing the
sensor and the door system in compliance with applicable national and international regulations and
standards on door safety.
•
The manufacturer of the sensor cannot be held responsible for incorrect installations or inappropriate
adjustments of the sensor.
2
Do not cover
the front screens.
Avoid exposure to
sudden and extreme
temperature changes.
Do not use aggressive
products to clean the
optical parts.
Only trained and
qualified personnel
may install and setup
the sensor.
Avoid moving objects
and light sources in
the detection field.
Keep the sensor permanently
powered in environments
where the temperature can
descend below -10°C.
Avoid direct exposure to
high pressure cleaning.
Always test the good
functioning of the
installation before
leaving the premises.
Avoid the presence
of smoke and fog in
the detection field.
The warranty is invalid if
unauthorized repairs are
made or attempted by
unauthorized personnel.
Hide quick links:
Advertisement
Table of Contents
