Table of Contents
Advertisement
PRECAUTIONS
‰ Shut off all power going to header before attempting any wiring procedures.
!
‰ Maintain a clean and safe environment when working in public areas.
‰ Constantly be aware of pedestrian traffic around the door area.
‰ Always stop pedestrian traffic through the doorway when performing tests that may result in
unexpected reactions by the door.
‰ ESD (electrostatic discharge): Circuit boards are vulnerable to damage by electrostatic discharge.
CAUTION
Before handling any board, ensure you dissipate your body's ESD charge.
‰ Always check placement of all wiring before powering up to ensure that moving door parts will not
catch any wires and cause damage to equipment.
‰ Ensure compliance with all applicable safety standards (i.e. ANSI A156.10) upon completion of
installation.
‰ DO NOT attempt any internal repair of the components. All repairs and/or component replacements
must be performed by BEA, Inc. Unauthorized disassembly or repair:
INSTALLATION TIPS
The door control system
and the header cover
profile must be correctly
grounded.
Avoid vibrations.
CLEANING & MAINTENANCE
Do not use harsh
cleaning agents.
Page 6 of 12
1. May jeopardize personal safety and may expose one to the risk of electrical shock.
2. May adversely affect the safe and reliable performance of the product resulting in a voided
warranty.
Only trained and qualified
personnel are recommended
to install and set up the
sensor.
Do not cover the sensor.
Always test the proper
operation of the
installation before
leaving the premises.
Avoid proximity to neon
lamps or moving objects.
75.0072.02 EAGLE ARTEK 20231023
The warranty is invalid if
unauthorized repairs are
made or attempted by
unauthorized personnel.
Advertisement
Table of Contents
