INSTALLATION TIPS
Avoid vibrations.
Avoid the presence
of smoke and fog in
the detection field.
MAINTENANCE TIPS
Clean the laser window
with compressed air.
If needed, wipe only with
a soft, clean and damp
microfibre cloth.
SAFETY TIPS
The door control unit
and the door cover
profile must be correctly
earthed.
•
The device cannot be used for purposes other than its intended use. All other uses cannot be guaranteed by
the manufacturer of the sensor.
•
The manufacturer of the door system is responsible for carrying out a risk assessment and installing the sensor
and the door system in compliance with applicable national and international regulations and standards on door
safety.
•
The manufacturer of the sensor cannot be held responsible for incorrect installations or inappropriate adjustments
of the sensor.
2
Do not cover
the laser window.
Avoid condensation.
Do not use dry or dirty
towels or aggressive
products to clean the
laser window.
Only trained and
qualified personnel may
install and setup the
sensor.
Avoid moving objects
and light sources in
the detection field.
Avoid exposure to
sudden and extreme
temperature changes.
Avoid direct exposure to
high pressure cleaning.
Always test the good
functioning of the
installation before leaving
the premises.
Keep the sensor permanently
powered in environments
where the temperature can
descend below -10°C.
The warranty is invalid if
unauthorized repairs are
made or attempted by
unauthorized personnel.