Diagnostic Tests; Table 5-6. Specific Diagnostic Test Groups - Motorola MCP750HA Series Installation And Use Manual

PPCBug

Diagnostic Tests

5
5-14
In order to use the diagnostics, you must switch to the diagnostic directory.
You may switch between directories by using the SD (Switch Directories)
command. You may view a list of the commands in the directory that you
are currently in by using the HE (Help) command.
If you are in the debugger directory, the debugger prompt
displays, and all of the debugger commands are available. Diagnostics
commands cannot be entered at the
If you are in the diagnostic directory, the diagnostic prompt
displays, and all of the debugger and diagnostic
<PPC1(A)-Diag>
commands are available.
Note that not all tests are valid for the MCP750HA. Using the HE
command, you can list the diagnostic routines available in each test group.
Refer to the PPCBug Diagnostics Manual, listed in
Documentation, for complete descriptions of the diagnostic routines and
instructions on how to invoke them.

Table 5-6. Specific Diagnostic Test Groups

Test Set Description
CL1283 Parallel Interface (CL1283)
DEC DECchip 21x40 Ethernet Controller Tests
ISABRDGE PCI/ISA Bridge Tests
KBD8730x PC8730x Keyboard/Mouse Tests
L2CACHE Level 2 Cache Tests
NCR NCR 53C8xx SCSI-2 I/O Processor Tests*
PAR8730x PC8730x Parallel Port Test
PCIBUS Generic PCI/PMC Slot Test
RAM Random Access Memory Tests
RTC MK48Txx Real-Time Clock Tests
prompt.
<PPC1(A)-Bug>
Appendix C, Related
Computer Group Literature Center Web Site
PPC1(A)-Bug>