Motorola MCP750HA Series Installation And Use Manual page 102

PPCBug
5
!
Caution
5-10
Table 5-1. Debugger Commands (Continued)
Command Description
PS Put RTC into Power Save Mode
RB ROMboot Enable
NORB ROMboot Disable
RD Register Display
REMOTE Remote
RESET Cold/Warm Reset
RL Read Loop
RM Register Modify
RS Register Set
SD Switch Directories
SET Set Time and Date
SROM SROM Examine/Modify
SYM Symbol Table Attach
NOSYM Symbol Table Detach
SYMS Symbol Table Display/Search
T Trace
TA Terminal Attach
TIME Display Time and Date
TM Transparent Mode
TT Trace to Temporary Breakpoint
VE Verify S-Records Against Memory
VER Revision/Version Display
WL Write Loop
Although a command to allow the erasing and reprogramming of Flash
memory is available to you, keep in mind that reprogramming any portion
of the MCP750HA's Flash memory (Bank B) will erase everything
currently contained in the Flash memory, including the PPCBug debugger.
Computer Group Literature Center Web Site