Table of Contents
Advertisement
For detailed descriptions of the various interconnect signals, consult the
support information documentation package for the MCP750HA SBC or
the support information sections of the transition module documentation as
necessary.
Keyboard/Mouse Connector (J16) (TMCP700 I/O Mode)
The TMCP700 has a 6-pin circular DIN connector for the keyboard and
mouse functions. For keyboard only operations, the keyboard may be
plugged directly into this connector. To get keyboard and mouse
operations, a Y-adapter cable is required. The pin assignments are listed in
the following table.
Table B-4. Keyboard/Mouse Connector J16 (TMCP700)
USB Connectors (J18/J19) (Optional TMCP700 I/O Mode)
The TMCP700 has two USB series A receptacles, J18 and J19. However,
the standard version of the MCP700 board does not route the USB signals
to these connectors in order to prevent long stubs on the MCP750HA front
panel USB connections. An alternate build option of the MCP750HA may
route the USB signals to the TMCP700 Transition Module in place of the
MCP750HA front panel connectors.
http://www.motorola.com/computer/literature
1
KBDDAT
2
MSDAT
3
GND
4
+5V
(Fused)
5
KBDCLK
6
MSCLK
TMCP700 Transition Module
B
B-15
Advertisement
Table of Contents
