Syslog; Upnp - Ricoh Pro C9100 Operating Instructions Manual

3. Monitoring and Configuring the Machine
SSH/SFTP communication login timeout setting
msh> ssh logintimeout [0–65535]
The default is 300.
Setting an open key for SSH/SFTP
msh> ssh genkey [{512|768|1024|2048|4096}]
The default key length is 2048.
Create an open key for SSH/SFTP communication.
Usable characters are ASCII 0x20-0x7e (32 bytes) other than "0".
The character string is blank.
If you do not specify this parameter, an open key with the default value will be created.
If you do not create an open key with this command, the following error log is created in the system
log.
sshd stop : no hostkeys available ERR:
Deleting open key for ssh/sftp communication
msh> ssh delkey
Encryption algorithm setting for SSH/SFTP communication
msh> ssh algorithm [{des|3des|aes128|aes192|aes256|blowfish|arcfour}]
• If you do not specify a character string, current setting is displayed.
• ssh can be used only with sftp.

syslog

Use the "syslog" command to display the information stored in the machine's system log.
View message
msh> syslog
• For details about the machine's system log, see page 105 "Message List".

upnp

Use the "upnp" command to display and configure the universal plug and play.
Public URL display
msh> upnp url
94