Domainname - Ricoh Pro C9100 Operating Instructions Manual

3. Monitoring and Configuring the Machine
• update: To delete old records and register new records.
• add: To add new records and store the old records.
• When CNAME overlaps, it is always changed, irrespective of the settings.
CNAME registration
msh> dns cname {on|off}
• You can specify whether to register CNAME.
• {on} means "active" and {off} means "inactive".
• The CNAME registered is the default name beginning with rnp. CNAME cannot be changed.
A records registration
msh> dns arecord {dhcp|own}
• dhcp: You can specify the method of registering an A record when the dynamic DNS function
is enabled and DHCP is used.
• own: To register an A record using the machine as the DNS client.
The DNS server address and the domain name already designated are used for the
registration.
Registering AAAA record as DNS client when DDNS function is enabled and DHCPv6 is set
dns aaaarecord [dhcpv6|own]
• dhcpv6: DHCPv6 server registers AAAA record as DNS client instead of the machine.
• own: Machine registers AAAA record as DNS client.
Record updating interval settings
msh> dns interval [1–255]
• You can specify the interval after which records are updated when using the dynamic DNS
function.
• The updating interval is specified hourly. It can be entered between 1 and 255 hours.
• The default is 24 hours.
resolv.conf display
msh> dns resolv
Specifying the protocol when asking names during dual stacking
msh> dns resolv protocol {ipv4|ipv6}
• This appears during dual stacking only.

domainname

Use the "domainname" command to display or configure the domain name settings.
78