Ricoh Pro C9100 Operating Instructions Manual page 100
Connecting the machine/system settings
Hide thumbs
Also See for Pro C9100:
- Operating instructions manual (236 pages) ,
- Technical bulletin (82 pages) ,
- Read this first manual (40 pages)
Table of Contents
Advertisement
3. Monitoring and Configuring the Machine
srvcert {on|off}
imca {on|off}
srvid "character string"
subdomain {on|off}
clear {a each command|all}
98
Parameter
Value configured
You can set the server certificate.
The default is "off".
You can enable or disable the certificate when
the intermediate certificate authority is present.
The default is "off".
You can set the server ID and sub domain of
the certificate server.
Usable characters: ASCII 0x20-0x7e (128
bytes). The default is blank.
You can specify whether or not to permit
access to the machine by users in subdomains
use.
The default is "off".
Returns the selected setting to its default value.
If you specify "all", all settings will be restored
to their default values. However, IEEE 802.1x
Auth. status (enable or disable) for Ethernet will
not be initialized.
Advertisement
Table of Contents
