Devicename - Ricoh Pro C9100 Operating Instructions Manual

3. Monitoring and Configuring the Machine
Bonjour service name setting
You can specify the bonjour service name.
msh> bonjour cname "computer name"
• The computer name can be entered up to 63 alphanumeric characters.
• If you do not specify a character string, the current setting is displayed.
Bonjour Installation location information setting
You can enter information about the location where the machine is installed.
msh> bonjour location "location"
• Information about the location can be entered up to 32 alphanumeric characters.
• If you do not specify a character string, the current setting is displayed.
IP TTL setting
msh> bonjour ipttl [1–255]
You can specify the IP TTL (the number of routers a packet can pass through).
• The default is 255.
Resetting the computer name and location information
You can reset the computer name and location information.
msh> bonjour clear {cname|location}
• cname: Reset the computer name. The default computer name will be displayed when the
computer is restarted.
• location: Reset the location information. The previous location information will be deleted.
Interface configuration
msh> bonjour linklocal "interface_name"
• If many types of interface are installed, configure the interface that communicates with
linklocal address.
ether

devicename

Use the "devicename" command to display and change the machine name.
View settings
msh> devicename
74
Interface Interface configured
Ethernet interface