Ricoh Pro C9100 Operating Instructions Manual page 48

2. System Settings
Proceed to Step 25.
19. Press [Change] under "User Name".
When [Kerberos Authentication], [Digest Authentication], or [Cleartext Authentication] is selected
for the authentication setting, the administrator account name and password can be used. Do not
enter the administrator account name and password when using authentication for each individual
or each search.
20. Enter the user name, and then press [OK].
Procedures for the user name setting differ depending on the server environment. Check your server
environment before making the setting.
Example: Domain Name\User Name, User Name@Domain Name, CN=Name, OU=Department
Name, DC=Server Name
21. Press [Change] under "Password".
22. Enter the password, and then press [OK].
The user name and password are required for administrator authentication to access the LDAP
server.
23. Enter the password again to confirm, and then press [OK].
If you select [Digest Authentication] or [Cleartext Authentication], proceed to Step 25.
24. Select the Realm.
25. Press [Connection Test].
Access the LDAP server to check that the proper connection is established. Check that
authentication works according to the authentication settings.
26. Press [Exit].
If the connection test fails, check your settings and try again.
This function does not check search conditions or the search base.
27. Press [ Next].
46