Etherauth; Etherconfig - Ricoh Pro C9100 Operating Instructions Manual

You can configure the Ethernet interface.
View settings
The following command displays the current domain name:
msh> domainname
Interface domain configuration
msh> domainname "interface_name"
Setting the Domain Name
msh> domainname "interface_name" name "domain name"
• A domain name can be entered up to 63 alphanumeric characters.
ether
Deleting the Domain Name
msh> domainname "interface_name" clear name

etherauth

Use the "etherauth" command to display or modify the authentication related parameters for Ethernet.
View settings
msh> etherauth
802.1x configuration
msh> etherauth 8021x {on|off}
• {on} means "active" and {off} means "inactive".

etherconfig

Use the "etherconfig" command to view and configure the Ethernet parameters.
View settings
msh> etherconfig
Specify Ethernet Speed
msh> etherconfig speed {auto_100|auto_1000|10f|10h|100f|100h}
• Auto_100=Auto 100 Select
• Auto_1000=Auto 1000 Select
Interface
Remote Maintenance Using telnet
Interface configured
Ethernet interface
79