Snmp - Ricoh Pro C9100 Operating Instructions Manual

msh> smb client port {139|445}
Authentication level for SMB client
• To view the setting
msh> smb client auth
• To specify the authentication level for SMB client
msh> smb client auth {0|1|2|3}

snmp

Use the "snmp" command to display and edit the SNMP configuration settings such as the community
name.
View settings
msh> snmp
• Default access settings 1 is as follows:
Community name:public
IPv4 address:0.0.0.0
IPv6 address:::
Access type:read-only
Effective Protocol:IPv4/IPv6
• Default access settings 2 is as follows:
Community name:admin
IPv4 address:0.0.0.0
IPv6 address:::
Access type:read-write
Effective Protocol:IPv4/IPv6
• If "-p" is added, you can view settings one by one.
• To display the current community, specify its registration number.
Display
msh> snmp ?
Community name configuration
msh> snmp "number" name "community_name"
• You can configure ten SNMP access settings numbered 1–10.
Remote Maintenance Using telnet
89