Table of Contents
Advertisement
Technical data of TC 2013
2.2
Technical data of TC 2013
Control voltage
Max. current consumption
Air connection
Clamping cylinder
Gas nozzle external diameter
Milling cutters, V-blocks and spacer plates for standard torches PKH and PKI 500 (404.15.70) with torch
external diameter Ø 28 mm.
(Please enquire about milling cutters, V-plates and and spacer plates for special torches).
Air motor
Air consumption
Max. welding wire diameter for cutting d= 1.0 mm, steel
Dimensions
Colour
Weight
Rating plate
There is a rating plate on the TC 2013 with the following particulars:
* Note This number is sequential and is issued individually for each delivered TC 2013.
2-2
24VDC
0,4 A
G 1/8"
Ø 65 x 34 mm stroke
min. Ø 20 mm
max. Ø 34 mm
n = 950 / min
Md = 3 Nm
Stroke = 45 mm
Shaft end Ø 9x16 length
25 litres/cycle
d= 1.2 mm, aluminium
d= 1.2 mm, steel
approx. 430 mm x 300 mm
approx. 100 mm height
RAL 7012 / Basalt grey
32 kg
*
3HDA000057A8519-001
at 5-10 bar
F = 1227N at 5 bar
adjustable using different
spacer plate thicknesses
at min. air pressure 5 bar
at min. air pressure 5 bar
at min. 6 bar air pressure
surfaces made of aluminium
and high-grade steel are
excepted
Torch cleaner TC 2013
Advertisement
Table of Contents
