Table of Contents
Advertisement
2.4.6
Disassembly
1.
Disconnect power supply.
2.
Disconnect compressed air connection.
3.
Detach grounding cable.
4.
Detach filled position sensor and unscrew release agent tank.
5.
Remove screws and pins from the baseplate of the stand.
6.
Take off TC 203 and carefully place on a suitable surface.
2.4.7
Disposal
Current directives and laws on waste must be observed.
•
Framework Waste Directive 2008/98/EC.
•
Waste Shipments Regulation 2006/1013/EC.
•
German Recycling and Waste Disposal Act (KrWG)
Waste within the meaning of the Recycling and Waste Disposal Act (KrWG) is all materials or
objects which their owner disposes of, wishes to dispose of or has to dispose of. Waste for recy-
cling is waste which is recycled; waste which is not recycled is waste for disposal.
The disposal of waste should preferably take place within the country. Waste avoidance takes pre-
cedence over waste recycling.
Torch cleaner TC 2013
CAUTION
Before the TC 2013 is disassembled the unit must be
completely switched off and protected against being
turned back on!
All lines must be pressureless and empty.
NOTICE
The operator is obliged to comply with applicable fed-
eral, state and municipal regulations for disposal and
scrapping.
Environmentally hazardous materials are to be dis-
posed of in accordance with local regulations and ordi-
nances.
3HDA000057A8519-001
Assembly and disassembly
2-15
Advertisement
Table of Contents
