Damage In Transport; Storage; Packaging/Disposal - ABB TSC 2013 Assembly Instructions Manual

Transport and storage
Table 1-1 Transport weight and packaging
Pos.
[units]
1
2
3
4
5
1.4.3

Damage in transport

If the TSC 2013 or separately ordered assemblies have been damaged in transport, the transport
company must be informed immediately for an expert assessment and a concealed damage claim
must be made.
1.4.4

Storage

The following should be observed in prolonged storage of the TSC 2013:
• storage as far as possible in the original packaging (carton or wooden pallet).
• Lubricate all bare steel parts lightly with commercial, silicone-free corrosion protection oil.
• Seal compressed air connections/plug connectors with protective caps.
• Protect stored parts against moisture.
1.4.5

Packaging/disposal

The transport packaging made available by ABB is used as packaging for the storage of system
components. Disposal takes place only in accordance with contractual agreements entered into.
1-10
Qty Components
1 TSC 2013 - complete
8 TSC 2013 - complete
1 TC 2013
10 TC 2013
1 Wire cutter
10 Wire cutter
1 TCP gauging (Bulls Eye)
10 TCP gauging (Bulls Eye)
1 TCP gauging with stand
10 TCP gauging with stand
3HDA000057A8519-001
Transport
weight [kg]
35
approx. 350 Pallet with wooden crate
27
approx. 365 Pallet with wooden crate
1.5
approx. 17
1.5
approx. 17
10
approx. 180 Pallet with wooden crate
Torch Service Center - TSC 2013
Packaging
Carton
Carton
Carton
Carton
Carton
Carton
Carton