Operation Of Media 7 Differential Pressure Meter; First Start-Up; Running The Start-Up Wizard - Samson Media 7 Mounting And Operating Instructions

Operation of Media 7 Differential Pressure Meter
8 Operation of Media 7 Differential Pressure Meter
Once the mounting and start-up activities have been completed, you can start with the set-
tings. The differential pressure meter is ready for use immediately after the electrical power
supply has been connected.

8.1 First start-up

After the differential pressure meter is put into operation for the first time after shipment, the
wizard starts automatically after the electrical power is connected.
Tip
We recommend proceeding as follows during first start-up:
1. Run the start-up wizard (see section 8.1.1).
2. Set user level (see section 8.1.3).
3. Perform zero calibration (see section 8.1.4).
8.1.1

Running the start-up wizard

Note
− The language is set to English by default on first start-up.
− If no settings are entered within five minutes, the display returns to the start screen.
Step 1 of 6: select language
1. Select the required language with
2. Confirm the selected language with
Step 2 of 6: select unit
1. Select the required unit with
2. Confirm the selected unit with
Step 3 of 6: set the minimum differential pressure Δp
1. Select the required digit within the number with
the selected digit.
58
or key.
key. Press
or key.
key. Press key again to continue.
0
key again to continue.
or key. Press key to confirm
EB 9510 EN