Option Module Wizard; Setting The User Level - Samson Media 7 Mounting And Operating Instructions

Operation of Media 7 Differential Pressure Meter
8.1.2

Option module wizard

If option modules are installed, the option module wizard automatically starts during first
start-up after completion or exiting the start-up wizard.
After the option module wizard starts, the slots for option modules are shown.
1. Press or
2. Press key to confirm the setting.
 Depending on the selected option module, diverse settings, such as name, signal
source, limit etc., can be made. Descriptions to the parameters can be found in the pa-
rameter list (section 12.2) for the corresponding option modules from menu item 2.4
onwards.
Note
− Select ESC to exit the option module wizard at any time.
− Select forward (>) and back (<) to navigate between steps.
− The option module wizard can be started from the Device settings (2) menu/Option mod-
ules (2.4)/Overview of option modules (2.4.1 and 2.4.1.1) by selecting a slot/option
module ('Specialist' user level only).
− If no settings are entered within five minutes, the display returns to the start screen.
8.1.3

Setting the user level

The Media 7 device has two user levels with different access privileges:
− Maintenance staff: values and parameters can be selected and read in this user level.
Changes are not possible in this level.
− Specialist: all values can be accessed and parameters changed in this user level. This us-
er level can be password-protected to prevent unauthorized access.
60
key to select the required slot or option module.
EB 9510 EN