Accessories; Valve Block; Further Accessories - Samson Media 7 Mounting And Operating Instructions

Design and principle of operation

3.5 Accessories

3.5.1 Valve block
Three valves are combined in the valve block
for Media 7. The valve block is bolted onto
the bottom of the Media 7 dp cell (see
Fig. 5).
The valve block offers the following bene-
fits:
− Mounting of an operating pressure
gauge possible.
− Fastened using two additional mounting
holes.
− The connected process lines can be by-
passed. This allows a zero calibration to
be performed regardless of the current
filling level of the tank.
− The differential pressure meter can be
easily removed by shutting off the mea-
suring lines (e.g. to replace a defective
device) without disturbing the running
process.
− Lead-seal holes
Î Details on the valve block:
see accessories for the Media Series
u T 9555
22
3.5.2

Further accessories

A list of available accessories for the Media
Series can be found in the Data Sheet
u T 9555.
EB 9510 EN