Connecting The Measuring Lines - Samson Media 7 Mounting And Operating Instructions

Mounting and start-up
5.3 Connecting the measuring
lines
Note
In following, pressurized lines are designat-
ed "measuring lines".
NOTICE
!
Risk of malfunction and incorrect measure-
ments due to mixing up the measuring lines.
Make sure that the high-pressure line is con-
nected to the high-pressure connection and
the low-pressure line to the low-pressure con-
nection.
Î Screw fittings are required to connect the
measuring lines (see Fig. 6, 3/4 as well
as accessories for Media Series
u T 9555).
Î Depending on the device arrangement,
seal the device connections that are left
unused with screw plugs (see Fig. 6, 5 as
well as accessories u T 9555).
34 EB 9510 EN