Table of Contents
Advertisement
4 Shipment and on-site trans-
port
The work described in this section is only to
be performed by personnel appropriately
qualified to carry out such tasks.
4.1 Accepting the delivered
goods
After receiving the shipment, proceed as fol-
lows:
1. Check the scope of delivery. Check that
the specifications on the nameplate and
on the differential pressure meter itself
match the specifications in the delivery
note. See the 'Markings on the device'
section for nameplate details.
2. Check the shipment for transportation
damage. Report any damage to
SAMSON and the forwarding agent
(refer to delivery note).
4.2 Removing the packaging
from the differential pres-
sure meter and modules
Observe the following sequence:
Î Do not remove the packaging until im-
mediately before installation of the differ-
ential pressure meter.
Î Dispose and recycle the packaging of the
differential pressure meter in accordance
with the local regulations.
Î Keep the packaging of the modules for
their interim storage.
EB 9510 EN
Shipment and on-site transport
4.3 Transporting the differen-
tial pressure meter
Transport instructions
− Only transport the differential pressure
meter without any batteries in it.
− Protect the differential pressure meter
against external influences (e.g. impact).
− Protect the differential pressure meter
against moisture and dirt.
− Observe the environmental conditions
according to EN 60721-3-2:
–
2K4 for the differential pressure me-
ter
–
2M1 for a differential pressure meter
with GSM module
4.4 Storing the differential
pressure meter
NOTICE
!
Risk of damage to the differential pressure
meter due to improper storage.
Î Observe the storage instructions.
Î Avoid long storage times.
Î Contact SAMSON in case of different
storage conditions.
Note
!
We recommend regularly checking the pre-
vailing storage conditions during long stor-
age periods.
4-1
Hide quick links:
Advertisement
Table of Contents
