Seat IBIZA ST Owner's Manual page 143

•
The engine coolant temperature is insufficient.
•
The alternator is faulty, for example the V-belt has ruptured.
•
If any of the conditions described in the previous section are not fulfilled.
WARNING
Never allow the vehicle to move with the engine off for any reason. You
could lose control of your vehicle. This could cause an accident and serious
injury.
•
The brake servo does not work with the engine off. You need more force
to stop the vehicle.
•
Power steering does not work when the engine is not running. That is
why it is much more difficult to turn the steering wheel.
•
Disconnect the Start-Stop system when driving through water (fording
streams, etc.).
Note
•
For vehicles with the Start-Stop function and a manual gearbox, when the
engine is started, the clutch must be pressed.
•
When the conditions for the Start-Stop function are not fulfilled, the
instrument panel displays the Start-Stop indicator dimmed.
•
The vehicle can be restarted by rotating the steering wheel three times,
that is, more than 270°.
Safety First Operating Instructions
Switching the Start-Stop function on and off
Every time the ignition is switched on, the Start-Stop function is
automatically switched on.
Manually deactivating the Start-Stop function
A ⇒ fig. 105
– Press button
A
the Start-Stop function is switched off, the indicator lamp comes
on.
– If the Start-Stop function is operating then the engine starts
immediately.
Switching the Start-Stop function on manually
A ⇒ fig. 105
– Press button
A
indicator lamp will turn off.
Practical Tips
Driving
Fig. 105 The Start-Stop
function button.
located on the centre console. When
located on the centre console. The
Technical Specifications
141