Seat IBIZA ST Owner's Manual page 226

224 If and when
A
– Move the loop in the direction of the arrow and remove the
1
⇒ page 223, fig.
cover
– Remove connector
– Extract the bulb and fit the replacement so that it sits correctly
into the cut-out on the reflector.
– Installation is done in the reverse order.
Dipped beam and side lights
144.
⇒ page 223, fig. 145 A
by pulling outward.
2
Fig. 146 Dipped beam
headlights
– Raise the bonnet.
⇒ fig. 146
– Remove the loop
remove the cover.
⇒ fig. 147
– Remove the connector
⇒ fig. 147
– Unclip the retainer spring
right.
– Remove the bulb and fit the replacement so that the rim of the
attachment plate is on the reflector cut-out.
Fig. 147 Dipped beam
headlights
A
in the direction of the arrow and
1
A
from the bulb.
2
A
pressing inwards to the
3