Seat IBIZA ST Owner's Manual page 110

108 Seats and storage compartments
Removing or adjusting head restraints
The head restraints can be adjusted by moving them up and
down.
Adjusting height (front seats)
– Press the button on the side and pull upwards to the desired
position.
– To lower the head restraint, press the button and push head
restraint downwards.
– Make sure that it engages securely into position.
Adjusting height (rear seats)
– Press the button on the side and pull upwards to the desired
position.
– To lower the head restraint, press the button and push head
restraint downwards.
– Make sure that the head restraint engages securely in one of its
positions ⇒ page 13.
Removing the head restraint
– Push the head restraint up as far as it will go.
– Press the button
– Pull head restraint out of fitting without releasing the button.
Fitting the head restraint
– Insert the head restraint into the guides on the backrest.
Fig. 69 Adjusting and
– Push head restraint down.
removing the head
restraints
– Adjust the head restraint to suit body size ⇒ page 12.
•
Never drive if the head restraints have been removed. Risk of injury.
•
Never drive if the head restraints are in an unsuitable position, there is
a risk of serious injury.
•
After refitting the head restraint, you must always adjust it properly for
height to achieve optimal protection.
•
Please observe the safety warnings in ⇒ page 107, "Correct adjust-
ment of head restraints".
Note
•
To fit and remove the rear head restraints, gently tilt the seat backrest
forwards.
⇒ fig. 69
(arrow).
WARNING