Engine; Muffler - Stihl MS 362 Manual

6.

Engine

6.1

Muffler

Always check and, if necessary,
repair the fuel system, carburetor,
air filter and ignition system before
looking for faults on the engine.
– Troubleshooting, b 3
– Remove the shroud, b 6.4
Before removing the muffler, set the
piston to top dead center to ensure
that no dirt falls into the cylinder.
1
: Pry out the plug (1).
– Do not refit old plugs, always fit
new ones.
1 1
3
2
: Take out the screws (1) and (2).
: Remove the muffler (3), check
and replace if necessary.
MS 362, MS 362 C
: Remove the exhaust gasket (1).
– Remove and install the spark
arresting screen – see instruction
manual.
1
Installing
– Hold the machine upright.
: Inspect and clean the sealing
faces (arrows) and remove any
gasket residue.
Always replace components with
damaged sealing faces.
2
1
1
– Position the exhaust gasket (1)
so that the warts (arrows) point
towards the cylinder.
: Fit the exhaust gasket (1) and
line it up with the warts (arrows)
against the cylinder exhaust port.
2
2
1
: Carefully place the muffler (1) in
position.
: Check the position of the gasket
and fit the screws (2).
– Do not tighten down the
screws (2) yet.
33