Stihl MS 362 C-Q Instruction Manual
  1. Manuals
  2. Brands
  3. Stihl Manuals
  4. Chainsaw
  5. MS 362 C-Q
  6. Instruction manual

Stihl MS 362 C-Q Instruction Manual

Hide thumbs Also See for MS 362 C-Q:
Table of Contents

Advertisement

Quick Links

See also: Instruction Manual
{
STIHL MS 362 C-Q
Instruction Manual

Advertisement

Table of Contents
loading

Related Manuals for Stihl MS 362 C-Q

Summary of Contents for Stihl MS 362 C-Q

  • Page 1 STIHL MS 362 C-Q Instruction Manual...

  • Page 3: Table Of Contents

    Rewind Spring Storing the Machine Checking and Replacing the Chain Sprocket Maintaining and Sharpening the Saw Chain This instruction manual is protected by copyright. All rights reserved, especially the rights to reproduce, translate and process with electronic systems. MS 362 C-Q...

  • Page 4: Quickstop Super Chain Brake System

    English QuickStop Super Chain Guide to Using this Manual Brake System This STIHL chain saw is equipped with a Pictograms chain brake system that can be activated in three different ways. As before, the chain brake can be activated Pictograms that appear on the machine by the inertia of the front hand guard in are explained in this Instruction Manual.

  • Page 5: Safety Precautions And Working Techniques

    Secure it against unauthorized use. model by STIHL or are technically products periodically. identical. If you have any questions in The user is responsible for avoiding Therefore, some changes, modifications this respect, consult a servicing dealer.
  • Page 6 Gasoline is an extremely soles. STIHL recommends the use of STIHL flammable fuel. Keep original tools, guide bars, chains, chain clear of naked flames. Do sprockets and accessories. They are Wear a safety hard hat not spill any fuel –...
  • Page 7 Make sure you always have good Place the unit on firm ground in an open balance and secure footing. area. Make sure you have good balance and secure footing. Hold the unit securely. The cutting attachment must MS 362 C-Q...
  • Page 8 Check and correct the idle speed setting at regular intervals. If the saw chain still moves, have your dealer check your machine and make proper adjustments or repairs. MS 362 C-Q...
  • Page 9 Do not cut with the bar nose. – not impossible. Use aids such as a cable Take special care with small, tough winch or tractor in such cases. – limbs, they may catch the chain. MS 362 C-Q...
  • Page 10 Do not work above shoulder height – Do not underbuck freely hanging limbs. Never operate your power tool with – one hand Maintain a distance of at least 2 1/2 tree lengths from the next felling site. MS 362 C-Q...
  • Page 11 (e.g. with an axe) – sand, stones and other foreign objects will dull the saw chain. 45° 45° Remove large buttress roots: Make – the vertical cut first, then the horizontal – but only if the wood is Direction of fall sound MS 362 C-Q...
  • Page 12 The felling notch (C) determines the direction of fall. Sapwood cuts in long-fibered softwood Shout a warning before starting the STIHL recommends the following help prevent sapwood splintering when felling cut. method: the tree falls. Make cuts at both sides of...
  • Page 13 – hold Shout a second warning immediately the saw horizontally and swing it as before the tree falls. far as possible, using the bumper spike as a pivot – avoid repositioning the saw more than necessary. MS 362 C-Q...
  • Page 14 If tree diameter is more than twice – For felling leaners – the length of the guide bar. For relieving cuts during bucking – If a large portion of heartwood – For DIY projects – remains uncut on large diameter trees. MS 362 C-Q...
  • Page 15 Make relieving cut at the not described in the instruction manual. compression side (1) Have all other work performed by a Make bucking cut at the tension servicing dealer. side (2) MS 362 C-Q...

  • Page 16: Cutting Attachment

    – health risk. Use only a spark plug of the type To reduce the risk of injury, shut off the approved by STIHL and make sure it is engine immediately if the chain brake in good condition – see "Specifications".

  • Page 17: Mounting The Bar And Chain

    Depending on the model, the scabbard Turn the screw (1) extension either comes standard with counterclockwise until the tensioner the saw or is available as a special slide (2) butts against the left end of accessory. the housing slot. MS 362 C-Q...

  • Page 18: Tensioning The Chain

    Go to chapter on "Tensioning the WARNING Check chain tension frequently – Saw Chain" Wear work gloves to protect your hands see chapter on "Operating from the sharp cutters. Instructions". Fit the chain – start at the bar nose. MS 362 C-Q...

  • Page 19: Checking Chain Tension

    HP Ultra two-stroke engine oil for bar by hand when the chain brake is Use only high-quality two-stroke engine maximum engine life. oil – ideally STIHL HP, HP Super or released MotoMix is not available in all markets. HP Ultra two-stroke engine oil, as they...

  • Page 20: Fueling

    WARNING Pressure can build up inside the canister – open carefully. The fuel tank and the canister in which fuel mixture is stored should be cleaned thoroughly from time to time MS 362 C-Q...
  • Page 21 Take care not to spill fuel while fueling and do not overfill the tank. Tank cap without symbols STIHL recommends you use the STIHL filler nozzle for fuel (special accessory). Opening Fill up with fuel.
  • Page 22 Raise the grip until it is upright. Take care not to spill fuel while fueling and do not overfill the tank. STIHL recommends you use the STIHL filler nozzle for fuel (special accessory). Fill up with fuel. MS 362 C-Q...
  • Page 23 – this causes the bottom of the cap to be turned to the correct position. Turn the cap clockwise and lock it in position – see section on "Closing". The marks on the tank cap and fuel tank are then in alignment. MS 362 C-Q...

  • Page 24: Chain Lubricant

    NOTICE Biological chain oil must be resistant to aging (e.g. STIHL Bioplus) since it will otherwise quickly turn to resin. This results in hard deposits that are difficult to remove, especially in the area of the chain drive and chain. It may even cause the oil pump to seize.

  • Page 25: Checking Chain Lubrication

    Disengaging the coasting brake Checking Chain Lubrication Chain Brake The chain brake system has two functions: Standard STIHL chain brake STIHL coasting brake Press down the throttle trigger The coasting brake stops chain rotation interlock lever. This releases the as soon as you release the saw's rear clutch drum and allows the chain to handle.

  • Page 26: Winter Operation

    The hand guard is accelerated towards have servicing and repair work carried the bar nose – even if your left hand is out exclusively by an authorized STIHL not behind the hand guard, e.g. during servicing dealer. Maintain the following the felling cut.
  • Page 27 At temperatures above 20°C In the event of engine running problems, Always return the shutter to the first check that conditions for use of the summer position (s ) to avoid cover plate still apply. engine running problems and overheating. MS 362 C-Q...

  • Page 28: Starting / Stopping The Engine

    Cold start l – this position is for starting minute) rear handle the cold engine when the engine has turned over for – the first time after ventilation of the combustion – chamber, if the engine was flooded MS 362 C-Q...
  • Page 29 With a new engine or after a long period of disuse, with machines without an additional manual fuel pump, it may be necessary to pull the starter rope several times - to prime the fuel line. MS 362 C-Q...
  • Page 30 Hold and start the chain saw If the Master Control lever was moved from the position starting acceleration n to the stop position 0 – afterwards simultaneously press the throttle trigger lockout and the throttle trigger. MS 362 C-Q...

  • Page 31: Operating Instructions

    Slacken off the chain if you have retensioned it at operating Check chain tension frequently temperature during work. A new saw chain must be retensioned more frequently than one that has been in use already for an extended period. MS 362 C-Q...

  • Page 32: Oil Quantity Control

    Measure groove depth – using the counterclockwise. measuring tool on the file gauge (special accessory) – in the area with the greatest wear NOTICE The chain must always be wetted with a film of lubricant. MS 362 C-Q...

  • Page 33: Air Filter System

    1/4 turn counterclockwise with the combination wrench. Remove the shroud (2). Removing the air filter Clean away loose dirt from around the filter. NOTICE To avoid damaging the filter, do not use tools for removing and installing the air filter. MS 362 C-Q...

  • Page 34: Adjusting The Carburetor

    Turn the high speed screw (H) If filter is caked with dirt: counterclockwise as far as possible Wash the filter in STIHL special (max. 3/4 turn) cleaner (special accessory) or a Carefully turn the low speed clean, non-flammable solution (e.g.

  • Page 35: Spark Arresting Screen In Muffler

    Speed erratic when idling; poor acceleration (despite low speed screw = The idle setting is too lean. MS 362 C-Q...

  • Page 36: Spark Plug

    Install Pull off the spark plug boot. only suppressed spark plugs of the WARNING type approved by STIHL – see Unscrew the spark plug. "Specifications". If the spark plug comes with a detachable adapter nut (1), screw the...

  • Page 37: Replacing The Starter Rope And Rewind Spring

    (3) and pawls (4). knots shown. WARNING Pull the knot back into the grip. The rewind spring may pop out and uncoil during this operation – take care to reduce risk of injury. MS 362 C-Q...
  • Page 38 Let go of the rotor. Lubricate the new spring with a few Release the rope slowly so that it drops of non-resinous oil. winds onto the rotor. MS 362 C-Q...

  • Page 39: Storing The Machine

    Using two saw chains in alternation helps preserve the chain sprocket. STIHL recommends use of original STIHL chain sprockets in order to ensure optimal functioning of the chain brake. MS 362 C-Q...

  • Page 40: Maintaining And Sharpening The Saw Chain

    – can lead to increased kickback tendency of the chain saw – risk of injury! Clean crankshaft stub and needle cage and lubricate with STIHL lubricant (special accessory) Slide needle cage onto the crankshaft stub MS 362 C-Q...
  • Page 41 The chain pitch marking (a) is embossed Sharpening angle Use a file holder in the area of the depth gauge of each STIHL saw chains are sharpened with a Always use a file holder (special cutter. 30° sharpening angle. Ripping chains, accessory, see table "Sharpening tools")
  • Page 42 The depth gauge determines the depth guide bar) in accordance with the to which the cutter penetrates the wood specified angle – according to the and thus the chip thickness. MS 362 C-Q...
  • Page 43 0814 252 3356 5605 007 1029 0.404 (10.26) 5.5 (7/32) 5605 772 5506 5605 750 4330 1106 893 4000 0814 252 3356 5605 007 1030 consisting of file holder with round file, taper square file and file gauge MS 362 C-Q...

  • Page 44: Maintenance And Care

    Chain lubrication Check Inspect, also check sharpness Saw chain Check chain tension Sharpen Check (wear, damage) Clean and turn over Guide bar Deburr Replace Chain sprocket Check Clean Air filter Replace Check Antivibration Elements Have replaced by dealer MS 362 C-Q...
  • Page 45 150 hours Safety labels Replace STIHL recommends a STIHL servicing dealer. see chapter on "Chain Brake" Firmly tighten down the cylinder base screws of professional saws (3.4 kW or more) after 10 to 20 hours of operation.

  • Page 46: Minimize Wear And Avoid Damage

    English servicing dealer. STIHL dealers are Minimize Wear and Avoid regularly given the opportunity to attend Damage training courses and are supplied with the necessary technical information. Observing the instructions in this manual helps reduce the risk of unnecessary If these maintenance operations are not wear and damage to the power tool.

  • Page 47: Main Parts

    16 Front hand guard 17 Front handle (handlebar) 18 Starter grip 19 Fuel filler cap 20 Master Control lever 21 Throttle trigger 22 Trigger interlock lever (activates coasting brake) 23 Rear handle 24 Rear hand guard Serial number MS 362 C-Q...

  • Page 48: Specifications

    ISO 22867 Weight (dry, without bar and chain): 6.0 kg Handle, left Handle, right STIHL single cylinder two-stroke engine MS 362 C: 3.5 m/s 3.5 m/s Cutting Attachment MS 362 C The K - factor in accordance with Directive 2006/42/EC is 2.5 dB(A) for...

  • Page 49: Special Accessories

    When repairing the machine, only use accessories. replacement parts which have been Serial number approved by STIHL for this power tool or are technically identical. Only use high- quality replacement parts in order to Guide bar part number avoid the risk of accidents and damage to the machine.

  • Page 50: Disposal

    STIHL Model: MS 362 C MS 362 C-Q Serial identification: 1140 STIHL products must not be thrown in Displacement: 59.0 cm the garbage can. Take the product, conforms to the specifications of accessories and packaging to an Directives 2006/42/EC, 2004/108/EC...

  • Page 51: Quality Certification

    All STIHL products comply with the highest quality standards. An independent organization has certified that all products manufactured by STIHL meet the strict requirements of the ISO 9001 standard for quality management systems in terms of product development, materials purchasing, production, assembly, documentation and customer service.
  • Page 52 0458-543-0121-A englisch www.stihl.com *04585430121A* 0458-543-0121-A...

Table of Contents