System - Stihl MS 362 Manual

No. Description
17 Mounting plate for assembly
stand
18 Ignition system tester, ZAT 4
19 Ignition system tester, ZAT 3
20 Torque wrench
21 Torque wrench
22 Installing tool 12
23 Screwdriver
- Setting disk
24 Screwdriver bit, T 27 x 150
25 Hook
26 Assembly stand
27 Puller
- Jaws (No. 3.1)
28 Puller
29 Stud puller M8
30 Screw sleeve
31 Socket, 13 mm, long
32 Hook
Remarks:
1) Use for releasing only.
124
Part No. Application
5910 850 1650 Clamping machine to assembly stand
5910 850 4503 Testing ignition system
5910 850 4520 Testing ignition system
5910 890 0302 0.5 to 18 Nm
5910 890 0312 6 to 80 Nm
5910 890 2212 Installing hookless snap rings in piston
5910 890 2304 Adjusting carburetor
5910 893 6600 Add-on for screwdriver (adjusting
carburetor)
5910 890 2400 IS-P screws (4 mm)
5910 890 2800 Detaching springs on clutch shoes
5910 890 3100 Holding saw for repairs
5910 890 4400 Removing oil seals
0000 893 3706 Removing oil seal(s)
5910 890 4500 Removing limiter caps
5910 893 0501 Removing bar mounting studs
5910 893 2420 Installing crankshaft
5910 893 2804 Removing and installing
decompression valve
5910 893 8800 Removing pickup body
Rem.
MS 362, MS 362 C