Installing The Filter Cartridges - Grate Skimmer - Alpine Spas SPA POOL Manual

INSTALLING THE FILTER CARTRIDGES - GRATE SKIMMER

MONT BLANC, WHISTLER, BLACKBURN, MAKALU, SUMMIT, MATTERHORN,
LUCANIA, MCKINLEY, VANCOUVER, MUNRO, EVEREST AND K2 SPA POOLS.
Filter(s) are found attached to the step box.
NOTE: Mont Blanc & Blackburn use a 'singular grate skimmer' with a different
design lid (no removable caps) and only have one 'thread hole' for one filter.
1 1
Remove the two drink holder caps
from the top of the skimmer lid.
4
Locate the two thread holes at the
bottom of the skimmer box.
7
Optional: If you find you get large
debris in the water (leaves, grass
etc), install the two mesh
pre-filters as shown in image.
AVOID DAMAGE TO SPA POOL & VOIDING WARRANTY - ONLY
USE FILTER CARTRIDGES PURCHASED FROM ALPINE SPAS.
2
Unscrew the two plastic screws
either side of the skimmer lid.
5
While lifting up the black grill flap,
thread in the two filters gently
(clock-wise).
8
Replace the skimmer lid by
threading the plastic screws back
in and placing the lid caps back on.
3
Lift off the skimmer lid to reveal
the inner skimmer box.
6
Lay the black grill flap back down
on top of the filters.
17