Led Lights; Activating The Lights - Svsmart Panels; Activating The Lights - Sv3 Panels; Activating The Jets - Alpine Spas SPA POOL Manual

7. GETTING TO KNOW YOUR SPA POOL

LED LIGHTS

Activating the Lights - SVSMART PANELS

Activate the LED lights by pressing the 'LIGHT' button found on the top-side
control panel. Once pressed you can change the modes by using the using the 'UP',
'DOWN' and 'OK' buttons to select desired option.
LIGHT UP

Activating the Lights - SV3 PANELS

Activate the LED lights by pressing the 'LIGHT' button found on the top-side
control panel. Change the modes by pressing the 'MODE' button, and then using
the 'UP', 'DOWN' and 'OK' buttons to select desired option.
LIGHT MODE
JETS

Activating the Jets

To turn on a jet pump - press the the jet button on the top-side control panel.
SPANET JET
Adjusting Jet Water Flow
Each individual jet piece can have its water pressure adjusted by opening and
closing the flow. For max pressure, simply turn the jet face gently in an
anti-clockwise direction until you feel it stop. To reduce/stop the flow, turn in a
clockwise direction. When closed, a small amount of water trickling through the jet
piece is normal (this is protection for the pump in case all jets pieces are shut off).
Twist jet anti-clockwise to open flow.
80
DOWN OK
UP DOWN OK
Twist jet clockwise to close flow.