Installing The Filter Cartridges - Floating Weir Skimmer; Startup & Refill Procedure - Alpine Spas SPA POOL Manual

5. STARTUP & REFILL PROCEDURE

INSTALLING THE FILTER CARTRIDGES - FLOATING WEIR SKIMMER

DUO, NOVA, CUB, FRONTIER, OASIS, YUKON, ARCTIC AND GLACIER SPA
POOLS.
Filter(s) are found attached to the step box.
1
Grab the top lid with two hands
and twist anti-clockwise to detach
(can be quite stiff).
4
Inside the skimmer box, see the
circular holding piece that the
filter cartridge will sit over.
7
Press the basket down gently to
ensure a tight fit.
AVOID DAMAGE TO SPA POOL & VOIDING WARRANTY - ONLY
USE FILTER CARTRIDGES PURCHASED FROM ALPINE SPAS.
16
2
Lift off the lid to reveal the basket
grill underneath.
5
Insert the filter and place it over
the circular holding piece so it sits
tight.
8
Replace the top lid by gently
putting downwards pressure while
turning clockwise, until it snaps
back into place.
3
Lift out the basket grill and place
aside.
6
Insert the basket grill into the top
of the filter, lining up the circular
hole.