Installation Instructions; Spa Pool Contents; Assembling The Accessories; Spa Pool Cover - Alpine Spas SPA POOL Manual

4. INSTALLATION INSTRUCTIONS

SPA POOL CONTENTS

Separate Items:
Spa Pool
Items Packaged Inside the Spa Pool:
Spa Pool
2-Tier Steps
Items Packaged Inside the iPack:
Two Filter Lid
Cover Caps
(Select models -
Grate Skimmer)

ASSEMBLING THE ACCESSORIES

Spa Pool Cover

The cover requires minimal installation other than unpacking and placing on top
of the spa pool. There are 8 safety locks hanging off the sides of the cover which
need to be screwed into the spa pool cabinet by the customer. Full instructions,
screws and cover keys can be found attached to one of the hanging safety locks.
Spa Pool Steps
Assembling the two-tier steps is self-explanatory. Simply press together - no
screws or tools required. The steps measure 890 x 600mm (W x L).
Note: The Yukon Spa uses combination locks rather than key locks. The steps are a
pre-assembled 3-4 tier ladder. Screws are not included with the cover.
10
Spa Pool Spa Pool Water
Safety Cover
1-2 Filter/s &
Two Filter Mesh Vertical Slat
(Select Models) (Select Models)
Drain Valve to Cable Exit
Garden Hose Grommet &
Attachments Controller Gland
(Select Model)
Cover Lifter
Care Kit (Optional extra)
1 Spare iPack
Aromatherapy
(Select models)
Spa Pool
Water Care
Handbook
Easy to use illustrated guide to water maintenance.
0800 99 33 88 www.alpinespas.co.nz sales@alpinespas.co.nz
Copyright Alpine Spas Ltd - 2017 - Ver 1.3
Important
Documents