Setting The Time & Date; Spa Pool Behavior - Running Modes; Changing The Running Mode - Alpine Spas SPA POOL Manual

Setting the Time & Date
Be sure to set the date and time before operating the spa pool. Vital functions
such as filtration, sanitization cycles and power saving settings are dependent on
correct time and date.
Navigate to the TIME display by following the instructions on the previous page
then follow these steps to set the time:
From the TIME
display, press the
'OK' button to edit
time parameters.
Time & Date Parameters in order:

Spa Pool Behavior - Running Modes

Your spa pool is pre-set to 'Normal' running mode by default which is the standard
operating mode and it's recommend to leave this unchanged. 'Normal' mode
means that the spa pool will always aim to keep the water temperature at the
users set temperature (default 38 °C) so it is ready to use whenever you are.
Three other modes are available to use, which may be useful at different times of
the year or if you cannot use the spa pool for a set period of time.
Name Mode
NORM Normal
ECON Economy Demand heating can only occur when filtration pump is running
AWAY Away
WEEK Week

Changing the Running Mode.

From any display mode:
Press and hold the
'UP/DOWN' buttons
together. The word
[MODE] will display.
A full SpaNet control panel manual with advanced functions can be
downloaded from our support page: http://alpinespas.co.nz/support/
The first parameter
is time format. Select
between 12/24hr with
'UP/DOWN' buttons.
Time Format (12/24 hr) Year (yyyy)
Function
Normal operation for demand heating and filtration
Demand heating is DISABLED. Filtration is fixed at 1 hour per day (the
keypad will scroll "AWAY MODE" every 60 secs)
Monday to Thursday: Demand heating is DISABLED and filtration
fixed at 1 hour per day. Friday to Sunday: Normal Operation
Press the 'OK'
button to enter
the [MODE]
adjustment.
To set the
preference and to
proceed, press the
'OK' button.
Month (mm) Day (dd) Weekday (mon - sun)
Select between the
available modes
with the 'UP/
DOWN' buttons.
Continue through the
remaining parameters
selecting with 'UP/
DOWN' and confirming
with 'OK'.
Hours (xx:oo) Minutes (oo:xx)
Press 'OK' to
confirm and save
the mode setting.
27