Diagnostics Menu - Emerson Rosemount CT5800 Manual

Troubleshooting and diagnostics
September 2019
7.4

Diagnostics menu

The Diagnostics menu lists those main components of the analyzer where problems can
be diagnosed using the BIT system. The Diagnostics menu also enables you to check on
the status and, where appropriate, the values of any of the listed components.
Select Diagnostics on the Main menu
7-15).
Figure 7-15: Diagnostics menu
Use
system. Once the component that you wish to diagnose has been highlighted, press
select it. The Diagnostics screen for that component opens. In the example shown in
Figure
diagnostics screen opens, as shown in
Figure 7-16: Laser 1 Diagnostics Screen
The component diagnostic screen shows the parameters of the component that was
selected on the Diagnostics menu. In the example shown in
of Laser 1 are shown. The parameters data displayed varies depending upon which
component was selected for diagnosis.
102
and buttons to highlight a component for further investigation by the BIT
7-15, LASER 1 is highlighted. Press
7-9) opens the Diagnostics menu
(Figure
to select LASER 1 . The Laser 1 component
Figure 7-16.
Figure
Reference Manual
00809-0100-5800
(Figure
to
7-15, the parameters
Emerson.com/Rosemount