Reference Manual
00809-0100-5800
7.11
Replacing the fuses
Use this procedure to replace the two Rosemount CT5800 fuses.
Prerequisites
NOTICE
This section is in accordance with IEC 60079-0: 2011 Clause 30. This section must not be
changed, amended, or removed.
NOTICE
Make sure that the fuses are in place and of the correct rating.
DANGER
ELECTRIC SHOCK
This article is in accordance with IEC 60079-0: 2011 Clause 30.
Death or personal injury may result if this is not observed.
The analyzer uses mains voltage that is dangerous to life. Make sure that the circuit
breakers are set to OFF and tagged off before opening the front cover.
Figure 7-21: Fuses
Rosemount CT5800
Troubleshooting and diagnostics
September 2019
117