Emerson Rosemount CT5800 Manual page 151

Reference Manual
00809-0100-5800
Figure 7-40: Temperature and pressure sensors
A. Temperature sensor
B. Pressure sensor
Note
Figure 7-40
of cable ties used to secure the wiring harness in the analyzer.
Procedure
1. Shut down the analyzer as described in
2. Open the enclosure as described in
3. Carefully cut and remove any cable ties used to secure the temperature sensor
4. Disconnect the temperature sensor wiring harness from the connector block on the
Rosemount CT5800
shows the routing of the temperature sensor wiring harness and the location
wiring harness.
DIN rail.
Troubleshooting and diagnostics
Shutdown procedure.
Opening the enclosure.
September 2019
151