Visual Examination - Emerson Rosemount CT5800 Manual

Reference Manual
00809-0100-5800
Examine the parameters shown to determine if the suspect component has failed or is
outside of its correct parameters. If you do not have the necessary information to
determine if the suspect component is faulty, refer to Cascade Technologies Ltd for advice
and assistance.
7.5

Visual examination

A visual examination of the analyzer is recommended as the next step in failure diagnosis if
the BIT fails to identify the problem.
DANGER
ELECTRIC SHOCK
This article is in accordance with IEC 60079-0: 2011 Clause 30.
Death or personal injury may result if this is not observed.
The analyzer uses mains voltage that is dangerous to life. Make sure that the circuit
breakers are set to OFF and tagged off before opening the front cover.
WARNING
TRANSPORTATION HAZARD
Failure to secure the equipment may cause a break-away and injure personnel.
When preparing the analyzer for transport by air, road, or rail, safeguard it against
movement or break-away during transport by securely strapping it in place. Use suitable
fasteners for the weight of the analyzer.
WARNING
INSTALLATION HAZARD
Failure to properly install the equipment may cause serious injury to personnel.
Make sure that the wall unit the analyzer is mounted on is solid, stable, and of a suitable
material to hold the weight of the analyzer.
Do not mount the analyzer on stud or partition walls.
Rosemount CT5800
Troubleshooting and diagnostics
September 2019
103