Sierra Wireless FX30 User Manual page 63

Rev 4 March 2019
c. Confirm the PDP context is active.
ACTIVE data session:
at!gstatus?
!GSTATUS:
Current Time:
Bootup Time:
System mode:
WCDMA band:
WCDMA channel: 662
GMM (PS) state:REGISTERED
MM (CS) state: IDLE
WCDMA L1 State:L1M_DCH
(11101)
RRC State:
761C (1108 30236)
RxM RSSI C0:
RxM RSSI C1:
IMS Reg State: UNKNOWN
IMS Srv State: UNKNOWN SMS,UNKNOWN VoIP
OK
The RMNET interface on the host computer should now become active, and
receive an IP address. Data can now flow from the host computer to the radio
network.
4. Deactivate the PDP context:
a. Deactivate the active context
AT!SCACT=0,1
b. Check the profile is deactivated
AT!SCACT?
!SCACT: 1,0
c. Confirm the PDP context is de-activated.
DE-ACTIVATED data session:
at!gstatus?
!GSTATUS:
Current Time:
Bootup Time:
System mode:
WCDMA band:
WCDMA channel: 662
GMM (PS) state:REGISTERED
MM (CS) state: IDLE
WCDMA L1 State:L1M_PCH_SLEEP
(11101)
RRC State:
0454 761C (1108 30236)
RxM RSSI C0:
RxM RSSI C1:
63
Using the FX30 as a USB Modem
7209
0
WCDMA
WCDMA 1900
CELL_DCH UTRAN Cell ID:
-91
-84
7227
0
WCDMA
WCDMA 1900
DISCONNECTED
-91
-106
Temperature: 33
Mode: ONLINE
PS state: Attached
NORMAL SERVICE
NORMAL SERVICE
LAC: 2B5D
RxD RSSI C0: -106
RxD RSSI C1: -106
IMS Mode: Not Support
Temperature: 33
Mode: ONLINE
PS state: Attached
NORMAL SERVICE
NORMAL SERVICE
LAC: 2B5D
UTRAN Cell ID:
RxD RSSI C0: -106
RxD RSSI C1: -106
41110030
0454