Sierra Wireless FX30 User Guide
Table 2-5: LED Behavior
LED
Power
(Default Behavior)
Note: Based on three GPIOs. To define
the behavior of this LED, see
on page 75.
User
Note: Based on two GPIOs. To define the
behavior of this LED, see
page 75.
Note: You can write Legato applications to
define User LED behavior.
Rev 4 March 2019
LED Behavior
Color / Pattern
Off
Solid Red
Solid Amber
Power LED
Possible colors:
Red
•
Green
•
Amber
•
User LED
on
Ethernet LEDs
The connector has two LEDs that indicate speed and activity. When looking into
the connector:
•
Right LED – Activity (blinking amber)
•
Left LED – Connection speed (green indicates a 100 Mbps link, and off
indicates no cable is connected or a 10 Mbps link is detected).
User LED
No power or input voltage
Gateway is powered on, not attached to cellular
network.
Attached to cellular network.
User-defined behavior
30
Power LED
Description
≥
32 VDC or
≤
4.75 VDC
41110030