Sierra Wireless FX30 User Manual page 69

Table C-2: FX30 AT Commands
Command
AT!FWD=ETHADDR
Sets the Ethernet IP address.
AT!FWD=CLEARETHADDR
Sets the Ethernet PHY IP address
back to default value (192.168.13.31)
USB AT Commands
AT!FWD=USBMAC
Sets the USB MAC address
Rev 4 March 2019
To set:
AT!FWD=ETHADDR,<ipv4 address>[,<ipv4 mask>[,<ipv4 gw>]]
Returned values are:
OK (if Ethernet IP address is set as requested)
•
ERROR (if invalid IP address)
•
Example:
AT!FWD=ETHADDR,192.168.13.33
OK
AT!FWD=ETHADDR,192.13
ERROR
To set:
AT!FWD=CLEARETHADDR
The returned value is OK if Ethernet IP address is set as requested
Example:
AT!FWD=CLEARETHADDR
OK
To set:
AT!FWD=USBMAC,<MAC address>
Note: Do not enter a MAC address with the first octet being a multicast (odd)
number. Otherwise, a random MAC address could be assigned to the network
adapter.
Returned values are:
OK (if USB MAC address is set as requested)
•
ERROR (if invalid MAC address)
•
Example:
AT!FWD=USBMAC,aa:3d:21:4b:a3:5a
OK
AT!FWD=USBMAC,49:12:fb:8e
ERROR
69
AT Commands Reference
Description
41110030