Advertisement
Quick Links
Advertisement
Related Manuals for D-Link R3
Summary of Contents for D-Link R3
- Page 1 AX3000 MU-MIMO Wi-Fi Gigabit Router...
-
Page 2: Before You Begin
Wireless Password: (as printed on the device label) The router R3 with default settings cannot connect to the Internet.To get s tarted, please set your own password for access to the web-based interface and change the WLAN name (SSID); then, if... -
Page 3: System Requirements And Equipment
SYSTEM REQUIREMENTS AND EQUIPMENT • A computer with any operating sys tem that supports a web browser. • A web browser to access the web-based interface of the router: Apple Safari 8 and later, Google Chrome 48 and later, Microsoft Internet Explorer 10 and later, Microsoft Edge 20.10240 and later, Mozilla Firefox 44 and later, Opera 35 and later. -
Page 4: Connection And Configuration
POWER button on its back panel. Make sure that the Ethernet • PC with Wi-Fi adapter: Turn on the router by pressing the POWER button on its obtain an IP address automatically. Connect to the network R3-2.4G-xxxx (for operating in the 2.4GHz band) or (for operating in the R3-5G-xxxx 5GHz band). -
Page 5: Troubleshooting
TROUBLESHOOTING default settings? You can res tore the factory default settings via the hardware RESET button located on the back side of the router. 1. Use a small paperclip to activate the button; insert it into the hole (with the device turned on), push, and hold for 10 seconds. - Page 6 FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Need help?
Do you have a question about the R3 and is the answer not in the manual?
Questions and answers