Safety Precautions; Warranty - Ismatec Reglo ICC Operating Manual

1 Safety Precautions
ISMATEC tubing pumps are designed for pumping and dispensing applications in laboratories and industry. As
®
such it is assumed that Good Laboratory Practice (GLP) and the following recommendations will be observed.
Do not place your fingers on or around the pump head
The pump must not be operated outside the designed operating and environmental conditions. In
particular, it is the user's responsibility not to exceed the specified maximum differential pressure for the
pump head.
The pump must not be used:
‐ for any medical applications.
‐ in explosion proof chambers or in the presence of flammable gases or fumes.
The pump must be switched off when pump heads, cassettes or tubing are inserted or changed.
The permeability of tubing depends on the material used and pressure conditions. Tubing can also
become electro‐statically charged. Please be aware of possible hazards when handling tubing in explosi‐
on‐proof chambers.
Pump heads consist of revolving parts. Therefore, the pump must not be operated before the cassettes
are fully seated on the pump head.
Do not manipulate the pump head before the pump is switched off and disconnected from the main
power supply.
Use extreme caution to ensure that no part of your body such as fingers, long hair, etc. or jewelry, or
loose objects such as cables or tubing, etc. are near the pump head during operation.
Tubing can tear and burst during operation. The necessary safety measures based on the specific situation
must be taken. When pumping corrosive media we recommend placing the pump in a collecting basin.
The pump should not come in contact with liquid.
Do not open or remove the housing while the pump is operating.
Service and repairs carried out by the customer or by third‐party companies voids all warranties.
Appliance coupler of the power supply is used to disconnect the device from mains supply.
2 Warranty
We warrant the pump to be free of defects, provided they have been installed and operated correctly according
to our operating instructions for a period of 2 years from date of purchase.
If production or material faults can be proven, the defective parts will be repaired or replaced free of charge at our
discretion.
A defective pump must be returned in the original ISMATEC® packaging or in packaging of equal quality.
The duration of the warranty is not affected by making a claim for warranty service.
Further claims are excluded.
Shipping costs are charged to the customer.
Our warranty becomes invalid in the case of:
•
Improper operation by the user, or if the pump is diverted from its proper use.
•
Unauthorized modification or misuse by the user or by a third party.
•
Improper site preparation and maintenance.
•
Operation outside of the environmental and electrical specifications for the product.
•
Use of third‐party software, hardware, accessories or consumables purchased by the user and which do
not comply with our specifications.
3