Important Information - Gazer F150 User Manual

•
Do not insert or remove the SD card when the device is on.
This can lead to the MVR malfunction. Wait for 30 seconds
after MVR shutdown, make sure that all the lights are off for
at least 10 seconds, and only then safely remove the memory
card.
•
Set the correct time and date before using the device.
•
Use at least 0.5 seconds time interval while pressing control
buttons, this guarantees proper functioning of the device.
•
Do not turn off the power for at least 20 seconds after the
power supply cable is connected. This is necessary to help the
built-in battery function correctly. If after you have started the
car (when the power supply cable is connected to the MVR),
the device failed to switch to the recording mode automati-
cally, simply unplug the power supply cable for ten seconds
and then try again.
•
Use the restart option (by pressing RESET button) in the fol-
lowing cases:
- power indicator is not on when the power supply cable is
connected;
- the device does not switch from the standby to the recording
or control mode;
- the device fails to function properly.
•
To prevent loss of protected files or recording interruption,
make sure that the memory card is not filled up with files
protected from loop overwriting (by G-sensor or PROTECT
button).

Important information

Warning!
ENG
5