Caution!
by pressing the OK button (15) to resume the MVR operation.
ENG
VIDEO RESOLUTION
TIME-LAPLSE
MUTE
TIME SPLIT
RECORD OVERWRITE
WDR
PHOTO RESOLUTION
QUALITY
DELAY POWER OFF
TIME
LCD TURN OFF
STAMP
GPS
G-SENSOR
SENSITIVITY
G-SENSOR
CALIBRATION
LANGUAGE
TIME AND DATE
FORMAT
DEFAULT SETTING
12
Setting menu
Once you finish setting up the device, start recording
Video Setting
SuperHD30; FHD30; HD30; WVGA30.
Video resolution setting.
1s; 5s; 10s; 30s; 1min.
Frame interval settings in the Time-Lapse mode.
ON; OFF.
Turning the sound recording function on and off.
1 min; 3 min; 5 min; OFF.
Setting the length of recorded videos with loop overwriting.
It is recommended to set the video file length at 2 minutes
because when the length of video files is minimal, the pauses
between them become minimal as well.
ON; OFF.
Turning the record overwrite function on and off.
ON; OFF.
Turning the dynamic range expansion function on and off.
Photo Setting
3M; 5M; 16M.
Photo resolution setting.
High; Middle; Low.
Photo Quality setting.
System Setting
3s; 10s; 1min; Never.
Set the time during which the MVR will continue recording after
the engined is turned off.
When «Never» is selected, the MVR will shut down only after the
built-in battery charge is depleted.
30s; 1min; 3min; OFF.
Setting the automatic screen timeout after a specified period.
ON; OFF.
Turning the date and time watermarks display on and off.
ON; OFF.
Turning the GPS watermarks display on and off (for Gazer
F150g).
To use GPS, please, connect power to the mount.
High; Middle; Low; Close.
Setting G-sensor sensitivity.
Calibration of G-sensor.
Calibrate the vehicle by setting the MVR to mount with
connecting power to the mount.
Menu language selection.
Date and time setting.
Memory card formatting.
Reset all settings to defaults.