Preparing Mvr - Gazer F150 User Manual

One needs to preconfigure the MVR before using it. By default
(factory settings), all main parameters are set to optimal values.
Nonetheless, one still needs to set the exact time and date. This is
required for further analysis of recorded video files.
1. Make sure that all indicators are turned off and then insert the
memory card into the corresponding slot without connecting the
МVR to a power source.
contacts facing the screen.
2. Connect the MVR power adapter to a 12V car cigarette lighter
socket and supply power.
switches to the recording mode. Therefore, the first thing you will
see on the screen will be real-time video feed from the camera
(point-to-point channel) and the recording mode indicator.
Main window icons definition
Recording Mode
(Video/Time-Lapse/Photo)
Recording resolution
Current recording
location
(for Gazer F150)
3.
To access the МVR settings menu, you first need to stop the
recording by pressing the OK button (15) (the recording stops
with some delay because the device needs to close and save the
file with the last video clip) and then press the MENU button (5).
4. Use «Up» (3) and «Down» (8) buttons to navigate the menu, OK
button (15) – to access submenus and select parameters, MENU
button (5) – to exit from the menu.

Preparing MVR

The memory card must be inserted with
Once turned on, the MVR automatically
Cycle Recording
Power/Battery
Indicator
WDR
GPS status
(for Gazer F150g)
Date and Time
ENG
11