Gazer F525 Congratulations on your purchase of Gazer mobile video recorder. Please read this manual carefully, before using the device. Warnings • Do not expose the device to direct sunlight. • Do not apply any chemicals when cleaning the device. Only use soft cloth to clean the frame and lens.
Important information Warning! • Do not insert or remove the SD card when the device is connected to a power supply or working with an external power unit. This can lead to the MVR malfunction. Wait for 30 seconds after the MVR shutdown, make sure that all the lights are off for at least 10 seconds, and only then safely remove the memory card.
Package contents Gazer F525 MVR User manual Warranty card Vacuum windshield 3M scotch tape Battery 40C, 3,7V mount windshield mount 500mAh Cigarette lighter socket Gazer Memory Gard USB cable power unit micro SDHC + Adapter for PC connection (with an integrated...
Controls 270º Do not insert or remove 1. IR diodes. your SD memory card when Lens. the power or indicator 3. Status indicator lights are on. (blue – operation mode, red - charging mode). 10. DOWN – down (navigating Microphone. different menus, reducing Speaker.
Usage • When the device is on, the status indicator (3) stays blue and starts flashing when the recording mode is activated. When the MVR is charging, the status indicator flashes red (3). In case the device is fully charged or no power is supplied, the indicator (3) stays off.
Preparing Memory Card Before using the MVR, it is important to format your memory card using specialized tools. We recommend using a free SD Formatter utility. Use a search engine to find and download it from one of many Internet resources or from the web portal http://www.sdcard.org. Formatting is necessary to optimize the memory card access speed.
Preparing MVR One must adjust the MVR settings before using the device. The main settings are optimal by default (factory settings) but in any case, you must set the exact time and date. This is necessary for correct functioning in the recording mode and further analysis of recorded video sequences.
Preparing MVR Settings menu Following icons can be found in the settings menu: Video Settings Resolution Date/Time Loop Recording (min) Beep Sound Language Motion Detection Frequency Settings Video Record Audio Format Default Setting Date Stamp Lamp Setting Version...
Settings menu FHD 1920x1080; HD 1280x720; WVGA 848x480; VGA 640x480. Resolution Specifies the resolution of recorded videos. It is recommended to record in 1920x1080 mode if you use 8-32 Gb memory cards. Off; 2 Minutes; 5 Minutes; 10 Minutes. Setting the length of recorded videos. Loop recording We recommend using the recording mode with a minimum video length (2 minutes).
Page 13
Settings menu Date and time setting. We recommend that you use accurate date and time settings and check them periodically. Date Date/Time format used: DD / MM / YYYY (day / month / year), MM / DD / YYYY, YYYY / MM / DD. Time format used: 24 hours (hour:minute:second).
Settings menu/Viewing records Settings menu in the photo shooting mode Use the MODE button to switch to the photo shooting mode and take a snapshot by pressing the REC/SNAP button. 12M 4032x3024; 8M 3264x2448; Resolution 5M 2592x1944; 3M 2048x1536. Off; Date; Date Stamp Date/Time.
Vacuum mount installation Until click Connect the frame of the device Install the MVR and fix the power with the mount. supply cable as shown in the drawing. 360° rotation Disengaging the frame from the mount Press on the tab Disconnect the recorder from the mount...
3M scotch tape mount installation Warning! Wipe the surface of the windshield before installing. Make sure the place is dry and clean. Do not install the mount on 3M scotch tape at temperature below +5°C. Because of such low temperature the difference between the temperature inside the car and outdoors, the 3M scotch will lose its adhesive properties and will not be able to fix the mount properly.
Page 17
3M scotch tape mount installation Make sure that the device is Attach the 3M tape on the mount by installed in a position from which hit removing the protective film on one can be conveniently removed later. side of 3M tape. Fix the mount so that other objects do not prevent you from easily removing your recorder.
Display 2,5”, rotatable Memory card support SDHC, up to 32 GB Memory card included Yes, Gazer micro SDHC + Adapter Date and time display Auto start on power up Yes, in the recording mode Glass mounting type Vacuum, 3M scotch tape 5V, PSU 12-24V connection to the car’s...
Page 19
С а 1. М 2. Ва а а 3. К а Э а 5. О а 6. П а а а 7. П а а а • О а а а • М а 8. М а • Р 9. П а...
Page 20
Gazer F525 П а Ва а а а Gazer. П а а, а а, а а а М • И а а а • Н а а. П а а, а а • И а а а а а. •...
П а а а М а В а , В В На Ра Да а/ Ц а З а Я Да Ча а На В За а Ф а а П а На ИК а В ПО...
Page 28
М а FHD 1920x1080; HD 1280x720; WVGA 848x480; VGA 640x480. О а а а Ра (Resolution) Р а а 1920 1080, а а а а 8-32 Gb. В . (Off); 2 . (2 Minutes); 5 . (5 Minutes); . (10 Minutes). На...
Page 29
М а На а а На а а а Да а а а а (Date/Time) а а . И а а : DD/MM/YY ( MM/DD/YY, YY/MM/DD. И а : 24- а В . (Off) В . (On). З а (Beep Sound) В...
М а /П а М а а а П MODE В а а а а а а а а REC/SNAP а 12M 4032x3024; 8M 3264x2448; Ра (Resolution) 5M 2592x1944; 3M 2048x1536. В . (Off); Да а (Date); На (Date Stamp) Да...
М а а а /П а М а а а а а За MODE В а а а а а а а REC/SNAP 12M 4032x3024; 8M 3264x2448; Р а а (Ра 5M 2592x1944; 3M 2048x1536. В . (В .); Да а (Да а); На...