Viewing Records - Gazer F150 User Manual

Setting menu/Viewing records
FIRMWARE VERSION
STORAGE
PLAYBACK IN
PASSWORD
FATIGUE DRIVING
WARNING
T-ADAS
T-ADAS CALIBRATION
• You can view recorded video clips directly from the MVR menu and
stream video to an external monitor via HDMI (for Gazer F150g)
or RCA ports using an appropriate cable. To view records on a PC,
connect the MVR to your computer using a USB cable. You can
also remove the memory card from the MVR and view recorded
videos on your PC directly from the memory card.
• To access the video viewing menu, first stop the current recording
with the OK button (15) and then press the MODE button (7)
to switch to the viewing mode. Use the «Up» (3) and «Down»
(8) buttons to navigate through video files and press the OK
button (15) to start or pause video playback. In the «viewing»
mode, the MENU button (5) is responsible for photo and video
files management submenu (deleting and protecting the current
file or all files on the memory card). Use the MODE button (7) to
exit from the viewing mode. When you finish viewing, do not forget
to resume the recording by pressing the ОК button (15).
Note: Gazer F150 MVR supports up to two memory cards with
copying files from one card to the other. Please, use a PC to
view copied media files.
Firmware version display.
Select a memory card for video recording (for Gazer F150).
Security Setting
Set password protection for access to the file viewing mode.
ON; OFF.
Enable/disable fatigue warning function (anti-sleep alarm).
ON; OFF.
Turning the LDWS (Lane Departure Warning System) and FCWS
(Forward Collision Warning System) on and off.
Calibration of intelligent LDWS and FCWS systems.
Use «Up» and «Down» buttons to perform calibration. Align
the purple line on the display with the horizon. Press the SOS
button to start adjusting the next line. Align the red line with the
borderline between the car hood and the road.

Viewing records

ENG
13