Important Information - Gazer CC100 User Manual

Important information

Backup camera Gazer CC100 has a universal car body mount.
Gazer models CC100-XXX and CC100-XXX-L are based on
Gazer CC100 cameras and designed for installation in the
license plate light housing (video camera is integrated into the
lamp body). Model CC100-XXX uses the original number plate
light (the lamp mounting and socket connection are identical to
the original car lamp). Model CC100-XXX-L uses LED license
plate light (color temperature 2700K). «XXX» code in the
camera name indicates compatibility with the factory code of
the original license plate light lamp.
Gazer CC100 camera transmits mirror-like video signal, so that
driver could rely on the video feed from the camera as he/she
would do when looking in the rear view mirror.
The image displayed by the camera has a parking assist
overlay (red, yellow and green lines). These lines have
curvature (repeating the curvature of objects in a wide-angle
lens camera) and indicate the same distance to the obstacles
across the full width of the visible image. Distance from car to
each guidance line depends on the car model (mounting height
and camera tilt). The driver must estimate (or measure) the
actual distance to each of the guidance lines on his/her car.
Attention!
Objects behind the vehicle are closer than they
appear in the camera-produced image. To avoid accidents and
injuries while driving in reverse, do not rely only on the rear
view camera. Be sure to always check the situation around the
car and monitor the situation in the rear-view mirror.
ENG
7